 |
The Katie Jig Jr.! |
Canadian Patent #2,286,763
Proudly Made in the USA!
Manuals
(Download the latest
manual--FREE)
KatieJig Tool System
Manufactured by Machining Center, Inc.
5719 Kopetsky Drive, Suite F
Indianapolis, IN 46217
Phone: 317-787-1965
FAX: 317-787-1973
http://www.katiejig.com/
The Katie Jig Jr.
Just look at the size! (That's a six-inch rule in the photos below.)
The details on the Katie Jig Jr.:
- Minium center to center spacing for pins: 7/8 inch
- Minimum and maximum board thickness: dependent on dovetail bits, 1/8 inch to 5/16 inch with 11/32 inch in diameter x 1/2 inch long bit shown below).
- Tails can be up to 1/2 inch thick.
- Will accommodate boards up to 6 inch wide with single Katie Jig Jr. kit or wider if 2 or more Katie Jig Jr. kits are combined.
The Katie Jig Jr. fits in the palm of your hand!
The Katie Jig Jr. and bits (in photo below):
Back to home page.