|US Patent #5,832,977 & 6,116,303
Canadian Patent #2,286,763
Proudly Made in the USA!
About Katie Jig System
(Download the latest
Ordering & Prices
Katie Jig News
Tips & Tricks
Testimonials & Project Photos
Register Your Katie Jig
Questions? Contact Us
KatieJig Tool System
Manufactured by Machining Center, Inc.
5719 Kopetsky Drive, Suite F
Indianapolis, IN 46217
The Dovetail Toaster
(Click on small image to view larger image.)
The Dovetail Toaster is a new clamping system for Katie Jig "KJ1" series (not for the Katie Jig Jr. "KJ2" series) that when used on a router table makes loading and unloading your material as easy as TOAST!
- Set the Katie Jigs pin spacing then set the edge stops.
- Drop in your box material.
- Squeeze the quick clamps.
"The quick clamps stay attached to the Katie Jig with our own custom clamp pads mounted on the Katie Jig; the quick clamps head just drops in the toasters pads."
- Cut the joint.
- Push the release lever on the clamps.
- Remove, and reload material for the next joint.
The Dovetail Toaster is the only clamping system in the world for a dovetail jig that you do not have to hold the material with one hand and operate the clamp with the other hand. Gravity is on your side.
Once your done with your dovetails, simply lift out your quick clamps, snap the original pad back on and use your clamp on another project.
Back to home page.